Qnap-security NVR-101 (Version: 2.8.0) User Manual

NVR-101 Network Video Recorder User Manual Version: 2.8.0 ©Copyright 2009. QNAP Systems, Inc. All Rights Reserved 1

High Reliability and Smart Features 1. Support extra secure data protection by RAID 1 (Mirroring) technology. 2. Support RAID 0, JBOD (Just a Bunch

Environment 4: NVR and IP camera are installed behind the router IP Address NVR 1 192.168.1.101 NVR 2 192.168.1.102 NVR 3 192.168.1.103 Router

101 Technical Support QNAP provides dedicated online support and customer service via instant messenger. You can contact us by the following means:

1.3 System Architecture The following illustrations show how NVR can be applied in different network environment. Network Surveillance Installation

Central Surveillance Deployment for International Enterprise 12

1.4 Check Package Contents Please check that your NVR package contains all the following items: 9 Network Video Recorder 9 Adaptor 9 Power Cord 9

1.5 Hardware Illustration 1. One Touch Auto Video Backup Button 2. USB 2.0 Port 3. LED Indicators 4. Power Button 5. USB 2.0 Ports 6. eSATA

Chapter 2 Install NVR Pre-installation Notice Before installing NVR, please make sure the following items are ready: z Network connection devices z

Security Setting of Web Browser Please make sure the security level of the IE browser in Internet Options is set to Medium or lower. 16

Before you start to use NVR, please install the hardware and configure the system. 2.1 Install Hardware Please follow the steps below to install the

3. After installing the disk, cover NVR with the front case and fasten the round head screws. 4. Connect the network cable. 18

5. Connect the power cord and plug in the power cord to the socket. 6. Turn on the NVR. The server will beep once. Please wait for a while until

FOREWORD Thank you for choosing QNAP products! This user manual provides detailed instructions of using the product. Please read carefully and star

2.2 System Configuration After server is turn on and ready, please insert the product CD to the CD-ROM drive of your computer and follow the steps b

Follow screen instructions to install Finder. Finder will run automatically then. If you are using Windows XP SP2 or later, the following screen wi

2. Execute Quick Setup Finder will detect the NVR in the network and ask if you want to perform quick setup. Click OK to continue. Note: If NVR is

The first page of the Quick Setup Wizard will be shown. Click Next to continue and complete the configuration. Note: Please make sure all the net

NVR will restart after changing the settings. When quick setup is completed, click Finish to continue. 24

3. Connect to NVR After finishing quick setup, you will return to the main screen of Finder. 25

Select a NVR on the menu and double click the server name to enter the monitoring screen. You must enter a correct user name and password to access

When the live video is displayed and the recording indicator is shown, you have successfully installed NVR. 27

Chapter 3 Start to Use NVR When you have installed NVR and other hardware, and connected it to the network, you can use the browser in your PC to co

2. Enter the user name and password to login NVR. Default User name: administrator Default Password: admin 3. To view NVR live video, you must in

Important Notice z Reading instruction Please read the safety warnings and user manual carefully before using this product. z Power supply This pro

3.2 Monitoring Page When you have successfully logged in NVR, the monitoring page will be shown. Select the display language. You can view the l

Playback: Enter recording playback page. The administrator can assign user’s right to access this page. Event Notification: When the alarm recordin

Note: 1. Starting and stopping manual recording will not influent scheduled or alarm recording. They are independent processes. 2. The default path

3.2.1 Live Video Window If the camera is properly configured, you can see the current video from the remote network camera within live video window.

Camera Status The camera status is indicated by the icons shown below: Icon Camera Status Scheduled or continuous recording in process This camera

3.2.2 Display Mode By changing display mode, you can easily adjust the visual effects when viewing video of single or multiple cameras. Single chann

Chapter 4 Playback Video Files To playback recording video of NVR is very easy to use. NVR provides an intuitive web interface to search and play r

z Play the Video Files 1. Click "Add files" . 2. Browse and select the files to play. 3. The playlist will be shown. Click "Play

z Connect to Server for Playback 1. Click "Play by Time". 2. The following dialog will be displayed. i. Configure servers: a. Add: Ad

z Quad-view Playback Quad-view playback allows you to find the video more quickly. You can check the video of four different cameras or time perio

Table of Contents Table of Contents ... 4Safety Warning ...

40

Express Quad View Playback Play the video files recorded by four IP cameras simultaneously. 41

4.2 Access Recordings via Network File Service NVR provides the following three network file services for users to access the recorded video files o

4.2.2 Web File Manager (HTTP) You can access recorded files from web browser by: z In Web Playback Interface, click . 4.2.3 FTP Server (FTP) You

Chapter 5 System Administration To login NVR system configuration page, please login the monitoring page as an administrator and click . The Syste

If the system is not configured yet, the Quick Configuration page will be open to guide you through the setup steps first. If there are questions,

5.1 Quick Configuration Please follow the instructions on the web page to configure NVR. Note: All changes to the settings will be effective only w

Step 4. Enter the IP address, subnet mask and default gateway of the server. Step 5. Select the disk configuration to initialize the disk volume

Step 6. Initialize IP camera setting. You can add up to 4 cameras in camera setting. Select the camera model; enter the camera name and IP address o

After completing the settings, click Start to apply the changes and initialize the system. Congratulations! Quick configuration is completed and yo

5.3.4 Protocol Management ... 565.3.5 View Network Settings ...

5.2 System Settings You can configure basic system settings including server name, date & time, and view the system settings. 5.2.1 Server Name

5.2.2 Date & Time Set the date, time, and time zone according to your location. If the settings are incorrect, the following problems may occur

5.2.3 View System Settings You can view all current system settings, e.g. server name, on this page. 52

5.3 Network Settings You can configure WAN and LAN settings, DDNS service, file service, host access control and view network settings in this secti

5.3.2 DDNS (Dynamic Domain Name) Service DDNS service enables users to connect NVR via domain name directly. There is no need to know the real IP a

5.3.3 File Services You can enable SMB/ CIFS file service, Web File Manager and FTP service to access the recorded video files. These settings are

5.3.4 Protocol Management To assign a specific port for accessing NVR via the web browser, please enable the option “Specify HTTP port number” and e

5.3.5 View Network Settings You can view current network settings and status of NVR in this section. 57

5.4 Device Configuration You can configure SATA disk, USB disk, and UPS settings in this section. 5.4.1 SATA Disk This page shows the model, size a

You can create the disk volume of the following type: z Single Disk Volume Each disk will be used as a standalone disk. However, if a disk is damag

Technical Support ... 101 6

5.4.2 USB Disk NVR supports USB disks for backup storage. Connect the USB device to the USB port of the server, when the device is successfully det

5.4.3 UPS If there is UPS, you can enable UPS support. If the AC power is abnormal, the system will shut down according to the settings. If the ti

5.5 User Management The server can be accessed by multiple users. For easier management and better control of users’ access right, you have to orga

5.5.1 Create user User Name The user name cannot be pure number. It must not exceed 32 characters. It is case-insensitive and supports double-byt

5.5.2 Edit User Select a user on the list and click Edit. You can change the password, assign system administration and camera access control. Howe

5.6 Camera Settings You can configure network camera, recording, schedule, alarm, and advanced settings. 5.6.1 Camera Configuration Please follow th

5.6.2 Recording Settings Select a camera on the list and configure the recording resolution, frame rate, and quality. You can also enable manual rec

2. All the settings will not take effect until you click the Apply button. When applying changes, recording operation will stop for a while (maximum

5.6.4 Alarm Settings You can enable alarm recording of the cameras. Recording will be triggered by alarm input of the camera or motion detected by t

5.6.5 Advanced Settings You can configure advanced recording settings in this section. z Maximum period for each recording file: Configure the m

Safety Warning 1. This product can operate normally in the temperature of 0ºC ~35ºC and relative humidity of 0%~85%. Please make sure the environmen

delete recording data after 7 calendar days, on the 8th day, files recorded on the first day of each camera will be deleted so that NVR can start to s

5.7 System Tools System Tools enable you to optimize the system maintenance and management. You can set alert notification, restart or shut down th

5.7.2 Restart/ Shut Down Follow the steps below to restart or shut down the server. 1. Enter the administration page and select Restart/ Shutdown i

5.7.3 Hardware Settings You can enable or disable the hardware functions of the server. z Enable configuration reset switch By enabling this optio

z Enable front video backup button NVR supports direct copy of recording data on the server to the connected USB device via the USB port. You can s

5.7.4 System Update Before updating system firmware, please make sure the product model and firmware version are correct. Follow the steps below to

5.7.5 Backup/ Restore/ Reset Settings z To backup all settings, including user accounts, server name and network configuration etc., click Backup

5.7.7 Ping Test To test the connection to a specific IP address, enter the IP address and click Test. 77

5.8 Logs & Statistics 5.8.1 Event Logs The server can store thousands of recent event logs, including warning, error, and information messages.

5.8.2 System Information This page shows the current system status for diagnosis. 79

Chapter 1 Introduction 1.1 Product Overview Thank you for choosing NVR-101 Network Video Recorder (hereafter referred to as NVR). NVR is a dedicat

Chapter 6 System Maintenance This section provides a general overview on system maintenance. 6.1 Reset Administrator Password and Network Settings

6.2 Power Outage or Abnormal Shutdown In case of power outage or improper shutdown of the server, the server will resume to the state before it is s

Chapter 7 Troubleshooting 1. The monitoring screen did not display. Please check the following: A. Check if you have installed ActiveX when loggin

simultaneous connections to the monitoring page at maximum. For better recording performance, please do not open too many IE browsers to view the liv

11. I cannot use the SMB, FTP, and Web File Manager of NVR. A. Please go to Network Settings-File Services page and check if these three functions

Appendix A Hard Disk Compatibility List This product works with 3.5" SATA hard disk drives from major hard disk brands. For the HDD compatibili

Appendix B LED Indication NVR provides LED indicators for you to indicate system status and information easily. 1. USB Status 2. System Status 3. H

LED Display & System Status Overview LED LED Display & System Status Power Blue: Power is on LAN Blink in orange when accessing network HD

Appendix C Dynamic Domain Name Registration NVR supports DDNS service provided by DynDNS. You can go to DynDNS website http://www.dyndns.org/ to re

Registration Procedure Please follow the steps below to register a dynamic domain name. This guide is for reference only. If there are any chang

Picture-in-Picture 4. Smart control of PTZ (Pan, Tilt, Zoom) & speed dome camera by direct clicking on video screen. 5. Support monitoring pre

2. Enter the user name, email address, and password to create an account for DDNS service. Please verify your email address to receive the confirma

4. Configure the mailing lists if necessary. Then click Create Account. 5. When your account is successfully created, a confirmation message wil

Appendix D Product Specifications Software Specification Video Display Mode Single, quad, Picture-in-Picture, Sequential mode Recording Cameras Up

Client PC Requirement CPU Pentium 4 CPU 2 GHz or higher Memory 512 MB or above Operation System Windows XP/ Vista (32 bit) Browser Internet Explo

Appendix E Network Camera Compatibility List AXIS Network Camera AXIS 205 AXIS 206 AXIS 206M AXIS 207/ 207W AXIS 207M/ 207MW AXIS 2100 AXIS 2130R AX

BL-C111 BL-C30 BL-C10 BL-C20 BL-C1 TRENDnet Network Camera TV-IP212/ TV-IP212W TV-IP312/ TV-IP312W TV-IP410/ TV-IP410W TV-IP422/ TV-IP422W Vivotek Net

Appendix F Configuration Examples Environment 1: NVR, IP Camera and monitoring PC are all in the same network Network Surveillance Installation for

Environment 2: NVR and IP camera are installed behind the router, while the monitoring PC is located remotely IP Address Mapped port in router N

In this example, to allow a remote PC to connect to NVR and the cameras, you need to: Step 1. Set up port mapping (virtual server) on the router. Fro

Environment 3: NVR and IP camera are all located remotely IP Address NVR 219.87.144.205 Camera 1 61.62.100.101 Camera 2 61.62.100.102 Camera 3